{"id":1547,"date":"2013-12-13T20:50:34","date_gmt":"2013-12-14T02:50:34","guid":{"rendered":"http:\/\/www.velocity-xl.com\/blog\/?p=1547"},"modified":"2015-02-08T08:17:43","modified_gmt":"2015-02-08T14:17:43","slug":"13-99-aft-wiring-complete","status":"publish","type":"post","link":"https:\/\/www.velocity-xl.com\/blog\/2013\/12\/13\/13-99-aft-wiring-complete\/","title":{"rendered":"13.2.2 \/ 13.6.2 Aft wiring complete"},"content":{"rendered":"<div class=\"pps-series-post-details pps-series-post-details-variant-classic pps-series-post-details-4068\" data-series-id=\"37\"><div class=\"pps-series-meta-content\"><div class=\"pps-series-meta-text\">This entry is part 7 of 67 in the series <a href=\"https:\/\/www.velocity-xl.com\/blog\/series\/13-electrical-instrumentation\/\">13 - Electrical \/ Instruments<\/a><\/div><\/div><\/div><p>Mostly. \ud83d\ude42<\/p>\n<p>Just about all the wiring in the aft portion is complete. That is, everything aft of the seats. The engine compartment was completed earlier. It the inside part that had me scratching my head. Lots of wires and trying to decide of the best routing for them.<\/p>\n<p>Here&#8217;s the back of the inside:<\/p>\n<p><a href=\"https:\/\/www.velocity-xl.com\/blog\/wp-content\/uploads\/2013\/12\/2013-12-13-IMG_20131213_101952_930a.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-thumbnail wp-image-1552\" src=\"https:\/\/www.velocity-xl.com\/blog\/wp-content\/uploads\/2013\/12\/2013-12-13-IMG_20131213_101952_930a-150x150.jpg\" alt=\"2013-12-13 IMG_20131213_101952_930a\" width=\"150\" height=\"150\" \/><\/a><\/p>\n<p>On the very bottom\/center of the picture is the roll trim motor. That&#8217;s not wired yet (I said &#8220;mostly&#8221;).<\/p>\n<p>Above that are the two voltage regulators. One on the left is for the primary alternator and the one of the right is for the backup alternator.<\/p>\n<p>Up the left side are the wiring bundles (blue) for the Engine Information System (EIS), navigation lights and power for the fuel level sending units.<\/p>\n<p>Halfway up on either side are two small black boxes (with two white labels). Those are the fuel level sending units (one for each tank).<\/p>\n<p>On the left side, to the left and slightly above the fuel sending unit is a terminal block for connecting various devices.<\/p>\n<p>Above that (top\/left) is the ground block for anything inside the aft cabin.<\/p>\n<p>Here are the two voltage regulators.<\/p>\n<p><a href=\"https:\/\/www.velocity-xl.com\/blog\/wp-content\/uploads\/2013\/12\/2013-12-13-IMG_20131213_172616_308.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-thumbnail wp-image-1550\" src=\"https:\/\/www.velocity-xl.com\/blog\/wp-content\/uploads\/2013\/12\/2013-12-13-IMG_20131213_172616_308-150x150.jpg\" alt=\"2013-12-13 IMG_20131213_172616_308\" width=\"150\" height=\"150\" \/><\/a><\/p>\n<p>This the right fuel sending unit and terminal block.<\/p>\n<p><a href=\"https:\/\/www.velocity-xl.com\/blog\/wp-content\/uploads\/2013\/12\/2013-12-13-IMG_20131213_101703_841a.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-thumbnail wp-image-1548\" src=\"https:\/\/www.velocity-xl.com\/blog\/wp-content\/uploads\/2013\/12\/2013-12-13-IMG_20131213_101703_841a-150x150.jpg\" alt=\"2013-12-13 IMG_20131213_101703_841a\" width=\"150\" height=\"150\" \/><\/a><\/p>\n<p>Closeup of the terminal block.<\/p>\n<p><a href=\"https:\/\/www.velocity-xl.com\/blog\/wp-content\/uploads\/2013\/12\/2013-12-13-IMG_20131213_101714_071.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-thumbnail wp-image-1549\" src=\"https:\/\/www.velocity-xl.com\/blog\/wp-content\/uploads\/2013\/12\/2013-12-13-IMG_20131213_101714_071-150x150.jpg\" alt=\"2013-12-13 IMG_20131213_101714_071\" width=\"150\" height=\"150\" \/><\/a><\/p>\n<p>From the top:<\/p>\n<ul>\n<li>Manifold Air Pressure Sensor Power Supply<\/li>\n<li>Manifold Air Pressure Sensor Signal<\/li>\n<li>Right Fuel Sender Unit Signal<\/li>\n<li>Left Fuel Sender Unit Signal<\/li>\n<li>Fuel Sender Unit Power Supply<\/li>\n<li>Navigation Lights<\/li>\n<li>Strobe Lights<\/li>\n<\/ul>\n<p>All the way in the top\/left is the ground block. This is connected to the ground block on the engine side of the firewall.<\/p>\n<p><a href=\"https:\/\/www.velocity-xl.com\/blog\/wp-content\/uploads\/2013\/12\/2013-12-13-IMG_20131213_172706_284.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-thumbnail wp-image-1551\" src=\"https:\/\/www.velocity-xl.com\/blog\/wp-content\/uploads\/2013\/12\/2013-12-13-IMG_20131213_172706_284-150x150.jpg\" alt=\"2013-12-13 IMG_20131213_172706_284\" width=\"150\" height=\"150\" \/><\/a><\/p>\n<p>&nbsp;<\/p>\n","protected":false},"excerpt":{"rendered":"<div class=\"pps-series-post-details pps-series-post-details-variant-classic pps-series-post-details-4068 pps-series-meta-excerpt\" data-series-id=\"37\"><div class=\"pps-series-meta-content\"><div class=\"pps-series-meta-text\">This entry is part 7 of 67 in the series <a href=\"https:\/\/www.velocity-xl.com\/blog\/series\/13-electrical-instrumentation\/\">13 - Electrical \/ Instruments<\/a><\/div><\/div><\/div><p>Mostly. \ud83d\ude42 Just about all the wiring in the aft portion is complete. That is, everything aft of the seats. The engine compartment was completed earlier. It the inside part that had me scratching my head. Lots of wires and &hellip; <a href=\"https:\/\/www.velocity-xl.com\/blog\/2013\/12\/13\/13-99-aft-wiring-complete\/\">Continue reading <span class=\"meta-nav\">&rarr;<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":""},"categories":[45],"tags":[],"series":[37],"class_list":["post-1547","post","type-post","status-publish","format-standard","hentry","category-45","series-13-electrical-instrumentation"],"jetpack_featured_media_url":"","jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/posts\/1547","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/comments?post=1547"}],"version-history":[{"count":3,"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/posts\/1547\/revisions"}],"predecessor-version":[{"id":3097,"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/posts\/1547\/revisions\/3097"}],"wp:attachment":[{"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/media?parent=1547"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/categories?post=1547"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/tags?post=1547"},{"taxonomy":"series","embeddable":true,"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/series?post=1547"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}