{"id":2419,"date":"2009-01-02T09:55:55","date_gmt":"2009-01-02T15:55:55","guid":{"rendered":"http:\/\/www.velocity-xl.com\/blog\/?p=2419"},"modified":"2016-03-29T15:06:31","modified_gmt":"2016-03-29T21:06:31","slug":"9-0-strakes","status":"publish","type":"post","link":"https:\/\/www.velocity-xl.com\/blog\/2009\/01\/02\/9-0-strakes\/","title":{"rendered":"9.0 Strakes"},"content":{"rendered":"
This entry is part 9 of 18 in the series 09 - Fuel System<\/a><\/div><\/div><\/div>

It’s time to build the strakes. It’s kind of hard to describe the strakes so I’ll use visual aids.<\/p>\n

Here’s the top view of the fuselage.
\n\"VelocityTopView3\"<\/a>
\nAt the rear is the center spar extending out the sides. The main wings will attach to this spar.
\nHere it is with the wings attached.<\/p>\n

\"VelocityTopView5\"<\/a>
\nOn airplanes with aluminum wings, they’re hollow and hold fuel. Velocity wings are a solid foam core and can’t be used to hold fuel. So an interface between the leading edge of the wing and the fuselage is created that will hold the fuel.<\/p>\n

\"VelocityTopView6\"<\/a><\/p>\n

The shaded area are called “strakes” and will hold (hopefully) about 40-45 gallons of fuel on each side. But here’s the catch: To properly build the strakes, the wings need to be mounted. But I don’t have a big enough shop. With both wings on, the shop is about 12 feet too short.<\/p>\n

Here’s a picture with one wing on.
\n\"2008-12-17<\/a><\/p>\n

I could build the strakes one side at a time but that creates some problems.<\/p>\n

    \n
  1. It takes twice as long.<\/li>\n
  2. Even with one wing on, it’s a pain moving around to do the work.<\/li>\n
  3. With one wing on, the center spar is unevenly torqued. It’s possible, with supports, to relieve this stress. But it’s a bit of work to get it just right. And if it’s not, the plane will not fly true without some adjustments.<\/li>\n
  4. Building strakes is somewhat challenging. At least the first time. I looked at going down to the factory and helping out building strakes but they didn’t have any planes down there that were at that point of construction.<\/li>\n<\/ol>\n

    So I fussed about whether to build a temporary extension so that I could fit both wings on, do it one side at a time or send it out to a facility where I could do both sides.<\/p>\n

    Because this will determine how true the plane flies, I decided that caution rather than blindly fumbling in was the best course of action.<\/p>\n

    Malcolm at Hangar 18 was busy with two builds so he wasn’t available. I met Tom Wright at Oshkosh last year. Tom owns Advanced Composites Technologies. In addition to having build numerous Velocities, he’s also builds UAV’s. Malcolm said that Tom did good work so I made arrangements to ship the plane to Tom’s shop in Friedens, PA.\u00a0 Then I’ll make the short flight out in the Cessna to work under the guidance of someone who has built a few strakes so that it’s done correctly.<\/p>\n

    Getting the plane on the trailer<\/p>\n

    \"2008-12-30<\/a> \"2008-12-30<\/a> \"2008-12-30<\/a><\/p>\n

    Loaded up with the wings underneath, strapped down and placarded.<\/p>\n

    \"2008-12-30<\/a><\/p>\n

    The battery on the truck was dead and I couldn’t get any of our cars in position to jump.\u00a0 So I pulled the 1965 International Cub Cadet out.<\/p>\n

    \"2008-12-30<\/a>\u00a0 \"2008-12-30<\/a><\/p>\n

    Worked like a charm.<\/p>\n","protected":false},"excerpt":{"rendered":"

    This entry is part 9 of 18 in the series 09 - Fuel System<\/a><\/div><\/div><\/div>

    It’s time to build the strakes. It’s kind of hard to describe the strakes so I’ll use visual aids. Here’s the top view of the fuselage. At the rear is the center spar extending out the sides. The main wings … Continue reading →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":""},"categories":[6],"tags":[],"series":[33],"class_list":["post-2419","post","type-post","status-publish","format-standard","hentry","category-6","series-09-fuel-system"],"jetpack_featured_media_url":"","jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/posts\/2419","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/comments?post=2419"}],"version-history":[{"count":5,"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/posts\/2419\/revisions"}],"predecessor-version":[{"id":3540,"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/posts\/2419\/revisions\/3540"}],"wp:attachment":[{"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/media?parent=2419"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/categories?post=2419"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/tags?post=2419"},{"taxonomy":"series","embeddable":true,"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/series?post=2419"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}