{"id":822,"date":"2012-02-27T13:01:34","date_gmt":"2012-02-27T19:01:34","guid":{"rendered":"http:\/\/www.velocity-xl.com\/blog\/?p=822"},"modified":"2015-01-27T18:33:18","modified_gmt":"2015-01-28T00:33:18","slug":"the-trip-home","status":"publish","type":"post","link":"https:\/\/www.velocity-xl.com\/blog\/2012\/02\/27\/the-trip-home\/","title":{"rendered":"00 The trip home"},"content":{"rendered":"
This entry is part 15 of 28 in the series 00 - Prep\/Logistics<\/a><\/div><\/div><\/div>

I flew down (commercial) on Wednesday into GSP. Thursday morning I took a cab to GYH (Donaldson Airport) and picked up the Explorer.<\/p>\n

Me and Malcolm spent the next three days finishing up some tasks and then I loaded up all the little stuff (boxes, parts, etc.) into the Explorer. Travis arrived on Sunday morning and we started loading the plane on his trailer. This is a relatively new rig that lets him carry the plane with the engine attached. Earlier versions required removing the engine.<\/p>\n

First we had to bolt on a mounting bracket.<\/p>\n

\"\"<\/a><\/p>\n

Then the front of the plane is lifted onto the trailer.<\/p>\n

\"\"<\/a>\"\"<\/a><\/p>\n

Next, the back of the plane is raised up with jacks (and in this case, Malcolm’s chain hoist). Once the back of the plane is high enough, Travis backs the trailer up until the plane is in position.<\/p>\n

Then a receiver mount is placed under the bracket and the plane is lowered. The landing gear is then retracted.<\/p>\n

\"\"<\/a><\/p>\n

Under the back of the plane you can see the orange hydraulic jack that will tilt the plane over to it’s transport position.<\/p>\n

 <\/p>\n

\"\"<\/a>\"\"<\/a><\/p>\n

One of Malcolm’s business neighbors is in the industrial surplus business. He gave me a roll of this green plastic material. We think it’s used for protecting cars during transport. So I put it anywhere I thought the plane might get beat up or if I wanted to seal something. I wasn’t sure it would stay on, but I figured that it wouldn’t hurt.<\/p>\n

Finally, we loaded up the wings.<\/p>\n

\"\"<\/a><\/p>\n

Travis pulled out as soon as the plane was loaded.<\/p>\n

\"\"<\/a><\/p>\n

I hung around for a few minutes and then it was time for me to hit the road.<\/p>\n

I left about 3pm on Sunday. I ended driving all the way home. I got in a little after 1am.<\/p>\n

Travis showed up around 9am the next morning. We were in get it done mode and it was just us so there aren’t any pictures of the unloading.<\/p>\n

But here’s the last picture from the shop cam before it left 18 months ago.<\/p>\n

\"\"<\/a><\/p>\n

And there’s the first picture from the shop cam after the return.<\/p>\n

\"\"<\/a><\/p>\n

It’s kind of hard to tell, but it’s a HUGE difference.<\/p>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

This entry is part 15 of 28 in the series 00 - Prep\/Logistics<\/a><\/div><\/div><\/div>

I flew down (commercial) on Wednesday into GSP. Thursday morning I took a cab to GYH (Donaldson Airport) and picked up the Explorer. Me and Malcolm spent the next three days finishing up some tasks and then I loaded up … Continue reading →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":""},"categories":[44],"tags":[],"series":[41],"class_list":["post-822","post","type-post","status-publish","format-standard","hentry","category-44","series-00-preparation"],"jetpack_featured_media_url":"","jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/posts\/822","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/comments?post=822"}],"version-history":[{"count":4,"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/posts\/822\/revisions"}],"predecessor-version":[{"id":1989,"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/posts\/822\/revisions\/1989"}],"wp:attachment":[{"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/media?parent=822"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/categories?post=822"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/tags?post=822"},{"taxonomy":"series","embeddable":true,"href":"https:\/\/www.velocity-xl.com\/blog\/wp-json\/wp\/v2\/series?post=822"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}