If you’re interested in anything, send me an email at don@velocity-xl.com and provide your shipping address. I’ll let you know how much shipping is.

Tekton 14 piece angle wrench set.

3/8″ – 1-1/4″. I can’t remember when I got these but I was becoming frustrated trying to get a wrench on a fitting in the keel and nothing would work. Malcolm suggested these. 5 minutes after they arrived, the fitting was loose. These are a bit of a specialty item, but I’ve lost count of the times when these were the only thing that worked. This particular set is no longer made but the 11 piece set is around $135. I’m asking $90. (carrying case not included)

1-1/8″ drill guide and bit.

This is DEFINITELY a niche item. When I was installing the arm on the elevator torque tube for the autopilot, I had this made to drill the holes. If you’ve ever tried to drill a hole into a round tube, you know how difficult it is. And getting it perfectly centered across the diameter, is impossible. This was made by an actual machinist. It is so perfectly made that it doesn’t matter what the orientation of the two parts are. The drill bit will always slide right through the guide. Place the two pieces that make up your torque tube arm over the torque tube, clamp this guide on and drill the 7/64″ pilot hole. Remove and open up the hole on the bracket and torque tube to whatever the final dimension is. You’ll find the bolt slides in with no binds. Includes 7/64″ drill bit and 1/8″ allen wrench.

Price $75