11.1 Engine Cowl Mod | The Big Build.

This entry is part 5 of 17 in the series 11 - Fairings

11.1.5 – Premolded NACA Scoop Installation
11.1.5 – Premolded NACA Scoop Installation
11.1.5 NACA Duct modification
11.1 Engine Cowl Mod
11.1 Engine Cowl Mod
11.1 Engine Cowl Mod
11.1 Engine Cowl Mod
11.1 Engine Cowl
11.1.6 Oil Access Door
11.2.2 Counterweight Fairings
11.1.5 Premolded NACA Duct Installation
11.2.1 Canard Tip Installation
11.2.2 Elevator Counterweight Fairings
11.1.3 Upper Cowl Wing Flange
11.1.99 Cowling Baffle Treatment
11.1.2 Cowling attach mod
11.1.8 Cowling Attachments

Once the epoxy cured, I removed the cowling and flipped it over. A new triax “plug” was cut and epoxied into the hole which was then covered with 2 layers of BID and one layer of carbon fiber BID.