- 9.7.1 Fuel Line Installation
- 9.7.1 Fuel Sump Drain
- 9.7.1 Fuel vent lines
- 9.7.1 Fuel supply line
- 9.7 Fuel Shutoff Valves
- 9.5.1 Sump Tank Hardpoints
- 9.5.1 Sump Tank Hardpoints
- 9.5.2 Install Sump Tank Cover
- 9.0 Strakes
- 9.2.3 Lower Strake Alignment
- 9.3.1 Fitting Wheel Well
- 9.3.2 Baffles and Bulkheads
- 9.4.2 Fitting Upper Strake
- 9.4.3 Upper Strake Installation
- 9.5.5 Sump Tank Installation
- 9.4.1 Fuel Cap Remediation
- 9.7 Fuel Shutoff Valves
- 9.99 Fuel Imbalance
The fuel from the sump to the engine will be the next to last of the fuel lines to be run inside the cabin (The vapor return line is the last). The line runs from the bottom/front of the sump, through a shut-off valve and then to a bulkhead fitting that passes through the firewall.
Here’s the line from the sump to the bulkhead fitting.
and the engine side of the bulkhead fitting.
